Window Installation, MicroHAWK V/F430-F with Ring Light
Step 7:
Reinstall the new #2-56 flat head screws through the diffuser into the camera PEM nuts. Do not
overtighten the screws (1.9 in-lbs. (0.21 Nm) max)
Step 8:
Install the new gasket, ensuring that it is fully constrained within the gasket groove.
Step 9:
Place the window on the front of the unit and secure with the new #4-40 pan head screws and
lock washers. Do not overtighten the screws (2.9 in-lbs. (0.33 Nm) max).
Step 10:
Inspect the gasket to ensure it did not come out of the groove in the window frame.
