Outer LED Removal, MicroHAWK V/F4XX-F
Note:
If installing an LED accessory only, skip to
Step 6
.
Step 4:
Remove the two screws from the LED boards.
Step 5:
Unplug the LED boards from the camera.
Note:
The LED boards have a connector interface. Gently pry the top of each LED board from the main
board using fine-tipped tweezers or an equivalent tool. Use caution not to contact the LEDs as they may
become damaged.
Outer LED Installation, MicroHAWK V/F4XX-F
Step 6:
Plug the LED boards into the main board. Use caution not to touch the LEDs, as they may be
damaged by contact.
Step 7:
Secure the LED boards in place using the screws provided. Do not over-tighten the screws.
(1.0 in./lbs. (0.11 nm max.)
