Polarizer Window Installation, MicroHAWK V/F430-F with Ring Light
Step 5:
Reinstall the new #2-56 flat head screws in the LED board PEM nuts without replacing the
diffuser. Do not overtighten the screws (1.9 in-lbs. (0.21 Nm) max)
Step 6:
Install the new gasket, ensuring that it is fully constrained within the gasket groove.
Step 7:
Place the polarizer window on the front of the unit and secure with the new #4-40 pan head
screws and lock washers. Do not overtighten the screws (2.9 in-lbs. (0.33 Nm) max).
Step 8:
Inspect the gasket to ensure it did not come out of the groove in the window frame.