![background image](http://html1.mh-extra.com/html/omron/323872/323872_manual_740777004.webp)
E3X-DACLR
3
*3. Mutual interference prevention cannot be used in super-high-speed mode,
and light intensity determination (I Mode) must be used. The response time
will be 150
s if an AND or OR is set for the control outputs.
*4. With light intensity determination (I Mode and Black Mode), the correlation is
not displayed, but rather the light intensity is displayed.
*5. The allowable ambient operating temperature changes according to the
number of Units that are linked.
2 Units:
25 to 55
C, 3 to 10 Units:
25 to 50
C, and
11 to 16 Units:
25 to 45
C
Amplifier Unit Connector
Pin and wire arrangement
Contact input
(relay or switch)
Non-contact input
(transistor)
NPN
ON: Shorted to 0 V
(sourcing current: 1 mA
max.).
OFF: Open or shorted to Vcc.
ON: 1.5 V max.
(sourcing current: 1 mA max.)
OFF: Vcc - 1.5 V to Vcc
(leakage current: 0.1 mA max.)
PNP
ON: Shorted to Vcc
(sinking current: 3 mA
max.).
OFF: Open or shorted to 0 V.
ON: Vcc - 1.5 V to Vcc
(sinking current: 3 mA max.)
OFF: 1.5 V max.
(leakage current: 0.1 mA max.)
Item
Model
E3X-CN21-M3J-20.3M
Rated current
2.5 A
Rated voltage
50 V
Contact resistance
20 m
max. (20 mVDC max., 100 mA max.)
(The figure is for connection to the Amplifier Unit and the adjacent Connector. It does not include the conductor resistance of
the cable.)
No. of insertions
Destruction: 50 times (The figure for the number of insertions is for connection to the Amplifier unit and the adjacent Connector.)
Materials
Housing
Polybutylene terephthalate (PBT)
Contacts
Phosphor bronze/gold-plated nickel
Weight (packed state)
Approx. 55 g
M8
Connector
Cable colour
1
brown
+
2
orange/white
Output 2 or ext. input
3
blue
–
4
black
Output 1
pink
Ext. Input
3
1
4
2
Summary of Contents for 323872
Page 12: ...E3X DACLR 11...