Omron Sentech STC-SBC202POEHS, User Manual

Page: 43 / 47

No.12S162-03
43/47
STC-SC202POEHS / SB202POEHS
Users guide
GenICam command
Camera command
Device Command Function
ALC_Peak_Average 100000 2FH ALC peak-average
DigitalGain 000000 31H The digital gain
ALCWeight1 100000 29H.0-3 Weight1 for ALC
ALCWeight2 100000 29H.4-7 Weight2 for ALC
ALCWeight3 100000 2AH.0-3 Weight3 for ALC
ALCWeight4 100000 2AH.4-7 Weight4 for ALC
ALCWeight5 100000 2BH.0-3 Weight5 for ALC
ALCWeight6 100000 2BH.4-7 Weight6 for ALC
ALCWeight7 100000 2CH.0-3 Weight7 for ALC
ALCWeight8 100000 2CH.4-7 Weight8 for ALC
ALCWeight9 100000 2DH.0-3 Weight9 for ALC
ALCWindowV1 100000 30-31H Vertical1 position for the ALC weight area (pixel)
ALCWindowV2 100000 32-33H Vertical2 position for the ALC weight area (pixel)
ALCWindowV3 100000 34-35H Vertical3 position for the ALC weight area (pixel)
ALCWindowV4 100000 36-37H Vertical4 position for the ALC weight area (pixel)
ALCWindowH1 100000 38-39H Horizontal1 position for the ALC weight area (pixel)
ALCWindowH2 100000 3A-3BH Horizontal2 position for the ALC weight area (pixel)
ALCWindowH3 100000 3C-3DH Horizontal3 position for the ALC weight area (pixel)
ALCWindowH4 100000 3E-3FH Horizontal4 position for the ALC weight area (pixel)
WB_WindowH1 100000 58-59H Vertical1 position for the white balance area
WB_WindowH2 100000 5A-5BH Vertical2 position for the white balance area
WB_WindowV1 100000 5C-5DH Horizontal1 position for the white balance area
WB_WindowV2 100000 5E-5FH Horizontal2 position for the white balance area
WB_WindowMode 100000 60H.4 White balance area ON/OFF
YThreshold 100000 4E-4FH Bright level threshold for auto white balance
DeviceID Camera Serial Number
Caution:
Width, Height and PixelFormat are effect to the image data size.
Please use GenICam command name command when change these values like below sample code.
In the case to change the Width
BOOL SetWidth( PvDevice *pDevice, PvInt64 lValue )
{
PvGenInteger* lGenInteger = dynamic_cast <PvGenInteger*>( pDevice->GetGenParameters()->Get( "Width" ) );
PvResult lResult = lGenInteger->SetValue(lValue);
return lResult.IsOK();
}
Aegis Electronic Group, Inc.
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com