No.12S162-03
22/47
STC-SC202POEHS / SB202POEHS
Users guide
4 Communication Protocol
This camera has a communication function that enables external devises, such as a PC, to control the camera’s
functions.
Please use the “StCamGigEWare” or “StGigECtrl” communication software, or the following communication protocol
to communicate to the camera:
4.1
Communication Method
UART
（
RS232C
）
,binary communication
4.2
Communication Settings
4.3
Communication Format
The Sending data format from the PC to the camera is as follows:
SOF
Device
Code
Read/Write
Page
Selection
Command
Code
Data
Length
Data
EOF
(8bit)
(6bit)
(1bit)
(1bit)
(8bit)
(8bit)
(R: 1 byte)
(W: n bytes)
(8bit)
The Receiving Data format from the camera is as follows:
After sending the Read Command:
After sending the Write Command:
Settings
Baud Rate
115,200 bps
Data Bit
8 bit
Parity
None
Stop Bit
1 bit
Flow Control
None
SOF
Data Length
Data
EOF
(8bit)
(8bit)
(n bytes)
(8bit)
SOF
Data Length
Receiving Code
EOF
(8bit)
(8bit) “00”
(1 byte)
(8bit)
Aegis Electronic Group, Inc.
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *[email protected] *http://www.aegiselect.com
