Omntec OEL8000II, Owner'S Manual

Page: 55 / 63

OEL8000II
Owners Manual 4-5
TU 02/06/07 15:24:31 *STATUS:NORMAL
STATUS |ALARMS |SETUP |MORE
1. When the green OK LED is illuminated, the
system is operating properly and no alarm
conditions exist.
2. When an alarm condition occurs:
♦
Horn will sound.
♦
Red ALARM LED illuminates.
♦
LCD shows status as ALARM. Remaining
displays alternates between showing the
number of alarms and identifying the
individual alarms.
♦
If auto print is enabled (see Section
3.2.2.6 – ALRM PRNT Submenu ), system
will provide an automatic printout.
3. Press
ACK to silence the horn.
♦
Horn will silence.
♦
LCD will clear and LCD will continue to
display
STATUS:ALARM .
♦
If auto print is enabled, system will print
the date and time of acknowledgment.
4. To review alarms on the LCD, select
ALARMS in Screen #1 of the MAIN Menu.
To obtain a printout, select ALARMS in
Screen #1 of Main Menu then select PRINT in
the ALARMS Submenu.
5. The red ALARM LED will remain illuminated and the LCD will display
STATUS:ALARM until all alarm conditions have been corrected.
6. Report all alarm conditions immediately to site manager:_________________ .
TU 02/06/07 15:24:31 *STATUS:ALARM
1 ALARM CONDITONS(S) EXISTS
PRINT | | |
TU 02/06/07 15:24:31 *STATUS:ALARM
HIGH WATER ALARM IN TANK 1
4.54 (In) ALARM POINT 3.0 (In)
PRINT | | |
TU 02/06/07 15:25:42 *STATUS:ALARM
_
STATUS |ALARMS |SETUP |MORE
TU 02/06/07 15:25:42 *STATUS:ALARM
HIGH WATER ALARM IN TANK 1
4.54 (In) ALARM POINT 3.0 (In)
NEXT |PREV. |PRINT |PAUSE
OK FAULT ALARM
OK FAULT ALARM
OK FAULT ALARM
OK FAULT ALARM