System Operations
3-10 OMNTEC
®
Mfg., Inc.
3.2.1.6
Screen #6 (Main Menu)
Selecting MORE on the bottom line of the LCD, advances the LCD to Screen #6 (see
Figure 3-8).
The bottom line of the screen changes and provides the following additional options:
♦
CLD – allows you to perform Continuous Leak Detection, and is primarily used
for leak testing sump and dispenser containment areas. This feature is discussed in
detail in the OEL8000II Installation Manual.
♦
PRINTER – displays a submenu that allows you set the print direction. The
choices are: no actions, paper, LCD, comm2, and comm3 (see Section 3.2.2.13 –
PRINTER Submenu).
♦
MORE – returns to Main Menu Screen #1.
3.2.2 Submenus
The submenus are examined in order of their occurrence starting from MAIN MENU
screens #1 through #6 (STATUS, ALARMS, SETUP, TIME, ALRM LOG, ALRM
PRNT, VLD, CITLD, DROP E/D, PRNT DROP, SHFT LOG, DIAG, CLD,
PRINTER).
3.2.2.1 STATUS
Submenu
The STATUS Submenu provides information based on the probes and sensors that
are connected to the controller and have been enabled. This can include tank
inventory data, where a magnetostrictive strobe has been installed, as well as
interstitial data, sump data, temperature, etc. It also allows the user to enable or
disable certain functions such as obtaining automatic printouts upon the occurrence
of an alarm event or a delivery. Additional functions are discussed in the following
subsections.
The STATUS Submenu is entered from Screen #1 of the MAIN Menu by selecting
STATUS on the bottom line of the LCD. It is divided into five screens, and you
advance to each screen by selecting MORE. To enhance readability, this manual has
numbered the screens and discusses them in numerical order. Each time you enter the
TU 02/06/07
15:24:31
*STATUS:NORMAL
CLD |PRINTER
|
|MORE
Fig. 3-8: Main Menu – Screen #6 (Status: Normal)
