Omnivision OVR 2000, User Manual, Page: 72 / 82

8. APPENDIX 1
68
8.3 OPEN PROTOCOL SETUP
Open Protocol Window is as below.
A
Product Name
and Product
List
Enter the product name of the P/T/Z camera to add. Once added, it will be stored
and shown in the list box.
B
Serial
Communicatio
n
User must adjust Baud Rate / Byte Size / Parity Bit / Stop Bit for proper
communication between DVR and P/T/Z camera. Refer to P/T/Z camera manual
to get exact values.
C
Commands
Set
User must input each command values. Please note that user should calculate
each value with the P/T/Z camera manual.
D Camera ID
Select a P/T/Z camera ID to work for. To set multiple cameras up, user must
input each different value for each camera ID. (Ex: When there are 5 P/T/Z
camera named A, user might need to input 5 different Commands Set for each
camera ID from1 to 5.)
E Timer
Check this option when the installed cameras use Timer. (To discern whether
the camera needs this, please refer to P/T/Z camera manual or contact the
manufacturer.)
F
Confirm
Buttons
User can add, delete or modify the values.