Omnivision OVR 2000, User Manual

Page: 19 / 82

2. SETUP
15
2.6 MOTION SETUP
Set the motion detection and sensitivity of each camera. User can also set the brightness and contrast of
the camera.
A CAMERA Select camera for setting Motion detecting mode.
B ALL Select Whole image for Motion detecting area.
C CLEAR Clear the last surveillance area that was set.
D ZONE Use part of the camera images for Motion detecting area.
Please refer to below to set the detecting zones.
1. Select a camera.
2. Press [Zone] button.
3. Drag the desired zone. (The zone forms like a square.)
E UNDO Clear all zones.
F SENSITIVITY Set the sensitivity of the motion detection. The system gets more sensitive