00075262.DOC, Version 1.0
33/36
Return to the starting point of the title
or to a defined spot (cueing)
To quickly jump back to the starting point of the
title or to a defined spot, a starting point (cue
point) can be stored temporarily for the button
CUE. The cue point will be overwritten with the
starting point of the next title when the next title is
reached or when the next title is selected.
1
To jump to the starting point of a title, press
the button CUE in pause or play mode.
• The unit stops and returns to the starting
point of the title (cue point) and is in cue
mode.
• The button lights red.
• After jumping to the cue point, playback can
be started with the button [►
II
].
• Alternatively, you can keep the button CUE
pressed and momentarily play the title. The
display shows
II
. As soon as you release the
button the unit instantly returns to the cue
point and is in pause mode.
2
To set the cue point at a different spot of the
title, the jog dial can be used for precisely
selecting the spot to one frame (1/75
second).
• The function fast forward/reverse must be
deactivated
Set the unit to pause. Then use the jogdial to
go to the precise spot. After turning, the
current spot is constantly repeated. As soon
as playback is started with the button [►II] a
new cue point is memorized.
• The button CUE flashes repeatedly.
Playing a continuous loop
A section within a title can be repeated as a
seamless continuous loop as many times as
desired. This loop can be overwritten at any time
and is deleted when selecting another title,
changing the CD or switching the unit off and on
again.
1
In play mode, shortly actuate the button IN
when the desired starting point of the loop is
reached.
• Playback is not interrupted.
• The button flashes blue.
•
“LOOP“ flashes repeatedly on the display.
2
Shortly actuate the button OUT when the
desired end point of the loop is reached.
• The section between the starting point and
the end point of the loop is continuously
repeated.
• The LEDs of the buttons IN and OUT will
light up.
•
The insertion “LOOP“ lights permanently.
3
To exit the loop and to continue the title,
press the button OUT.
• The button IN will flash to indicate that the
loop has been memorized and is ready to be
engaged.
• The illumination of the button OUT and the
insertion “LOOP“ in the display will be
extinguished.
• By selecting another title it is also possible to
exit the loop.
4
To restart the loop, press the button
RELOOP.
• The buttons IN and OUT will light up again.
5
To program another loop, redefine the
starting and the end point with the button IN
and OUT.
