19
1
PROTECT indicator
Lights up red when a protective circuit is active; the speakers are electrically separated from the
amplifier for protection.
2
LIMIT indicator
Lights up red when the signal level is too high; the limiter will reduce the signal level to protect the
speakers.
3
SIGNAL indicator
4
POWER indicator
5
Level control for the satellite speakers
6
Speaker connectors
Speaker jacks for connecting the left and right satellite speaker.
7
Feed-through output
Balanced XLR jacks, connected in parallel to the inputs, to connect another device, e.g. a further
active speaker system.
8
Signal input
Balanced XLR jacks for connecting audio units with line level output (e.g. mixers or preamplifiers).
9
Level control for the subwoofer
10
Reversal switch
Selector switch for the phase between subwoofer signal and satellite speaker signal.
11
Signal output
Balanced XLR jacks, providing the high-pass filtered output signal, to connect further active
speaker systems.
12
Aux input
RCA connectors for connecting audio units with line level output (e.g. CD player) as an alternative
to the combo inputs.
13
Groundlift selector switch for the signal input
• upper position: signal ground and housing ground are connected
• lower position: signal ground and housing ground are separated
14
Power switch
Turns power to the PA system on and off.
15
Power input
Used to plug in the supplied power cord.
16
Fuse
Only replace the fuse when the device is disconnected from mains. Only use fuses of the same
rating and power. The correct fuse value is specified on the rear panel.
Summary of Contents for MagiCARPET-400
Page 1: ......
Page 8: ...8 5 BEDIENELEMENTE UND ANSCHL SSE...
