17
4
OPERATING ELEMENTS & CONNECTIONS
Models 208A | 210A | 212A | 215A | 2215A
This user manual describes the rear panel of model 2215A as a reference. Illustrations and features of the
other models are comparable.
1
Microphone inputs MIC 1 and MIC 2
XLR and 6.3 mm jack inputs for connecting a
microphones.
Models 208A, 210A and 212A only have one
microphone input.
2
Level control MIC 1 and MIC 2
Microphone volume can be adjusted separately
from the main signal.
3
Line input LINE IN
XLR and RCA input for connecting audio units
with line level output (e.g. mixer, CD player).
4
Level control LINE LEVEL
Line volume can be adjusted separately from the
main signal.
5
Output LINE OUT
Output (XLR and 6.3 mm jack) of the master
signal of all channels for connection to a line
input of a mixer, amplifier or a further active
speaker.
Model 208A only has a 6.3 mm jack.
6
Level control MASTER LEVEL for the overall
volume
Model 208A does not have a master level control.
7
Tone controls HIGH and LOW
Adjust high and low frequencies of the master
signal.
8
CLIP indicator
Lights red in case of overload. Reduce the
volume with the master control until the LED
does not light anymore, or only at signal peaks.
9
POWER indicator
10 Voltage selector switch
11 Power switch
Turns the device on and off.
12 Power supply
Used to plug in the supplied power cord.
13 Fuse
Only replace the fuse when the device is
disconnected from mains. Only use fuses of the
same rating and power. The correct fuse value is
specified on the rear panel.
Summary of Contents for MagiCarpet 151A MK2
Page 1: ......
