Environmental Notices
The equipment covered by this manual must be disposed of or recycled in
accordance with the Waste Electrical and Electronic Equipment Directive (WEEE
Directive) of the European Community directive 2012/19/EU on waste electrical and
electronic equipment (WEEE) which, together with the RoHS Directive 2015/863/
EU, for electrical and electronic equipment sold in the EU after July 2019. Such
disposal must follow national legislation for IT and Telecommunication equipment
in accordance with the WEEE directive: (a) Do not dispose waste equipment with
unsorted municipal and household waste. (b) Collect equipment waste separately.
(c) Return equipment using collection method agreed with Omnitron.
The equipment is marked with the WEEE symbol shown to indicate that it
must be collected separately from other types of waste. In case of small items the
symbol may be printed only on the packaging or in the user manual. If you have
questions regarding the correct disposal of equipment go to www.omniton-systems.
com/support or e-mail to Omnitron at [email protected].
Safety Warnings and Cautions
ATTENTION: Observe precautions for handling electrostatic discharge
sensitive devices.
WARNING: Potential damage to equipment and personal injury.
WARNING: Risk of electrical shock.
WARNING: Hot surface.
RuggedNet
®
GHPoE/Si and GHPoEBT/Si
User Manual
Product Overview
The RuggedNet GHPoE/Si and GHPoEBT/Si are industrial unmanaged Ethernet
switches that feature fiber or copper uplink ports and four 10/100/1000 RJ-45
copper Power-over-Ethernet user ports.
The GHPoE/Si is a pre-IEEE 802.3bt switch featuring up to 60W per user port
models. The GHPoEBT/Si is an IEEE 802.3bt compliant PoE switch featuring 60W
and 100W per user port models.
The RuggedNet switches functions can be configured using easily accessible
DIP-switches.
RuggedNet 6 Port Module
The modules are Power Sourcing Equipment (PSE) that provides up to 100W
(depending on the model number) per RJ-45 user port and supports frame sizes
up to 10,240 bytes.
Front Panel
The front of the module provides access to the RJ-45 PoE and uplink ports.
RJ-45 PoE, Uplinks and Fixed-Fiber Ports
The RJ-45 PoE Ethernet user port supports 10BASE-T, 100BASE-TX and
1000BASE-T protocols, auto-negotiation and auto MDI/MDI-X crossover.
The module is available with one or two gigabit SFP transceiver uplink ports or
two 10/100/1000BASE-T RJ-45 copper uplink ports or two LC fixed gigabit fiber
uplink ports.
The SFP ports support SERDES 1000BASE-X fiber transceivers (multimode,
single-mode and single-mode singe-fiber) and SGMII 10/100/1000BASE-T copper
transceivers. The SFP interfaces operate in auto-negotiation and support full
duplex operation.
Fixed-fiber 1000BASE-X connectors are available with multimode (MM) dual fiber,
single-mode (SM) dual fiber and single-mode single-fiber (SF) options. Dual fiber
options are available with ST, SC and LC connectors. Single-fiber options are
available with SC connectors.
Page 3
Page 4
