Page 61
The default setting is “auto negotiation”.
Use the “Flow Control” pull-down menu to enable or disable flow control on the selected port.
Use the “Port Access” pull-down menu to enable or disable port access on the selected port.
Use the “PoE State” pull-down menu to configure the PoE/PSE for the selected port. The options are:
PoE power can be disabled, auto detect to 802.3af, auto detect to 802.3af/at or forced to 30watts. The
default setting is PoE Auto Detect 802.3af/at.
Click on the “Power Cycle Port x” button to reset the power to the attached Powered Device. The power
will be removed for 5 seconds, than reapplied.
Click the “Save” button to save the changes to the Port Configuration screen.
