Page 41
6.1.19 SFP (SFP)
The
sfp
command displays the digital diagnostic information on the selected SFP port.
To display the digital diagnostic information, use the
sfp
command from the CLI prompt. A list of options
is displayed when the
sfp -h
command is entered.
> sfp -h
Description:
sfp - small form pluggable port information
Synatax:
sfp [-h]
sfp -list
sfp -s [-p pNum]
Switches:
-h display help information
-list list all SFP part numbers installed
-p port number, [pNum]: {F1,F2}
-s show current status
>
NOTE: Port number selection will vary depending on the model.
The options available using the
sfp
command are shown below.
The
-h
switch displays the help screen presented above. It is static and provides help information for the
specific command.
The
-list
switch lists the SFP transceivers installed in the switch.
The
-p
switch selects the SFP port number.
The
-s
switch displays the current state of the changes made to the switch.
To display the SFP transceivers installed in the switch, use the
sfp -list
command.
> sfp -list
Port = F1: Omnitron, p/n 7207-1, s/n A129070363
Port = F2: Omnitron, p/n 7207-1, s/n B909050136
>
