39
Viewing Stored Readings and 7, 14, 30 Days
Average from Memory
You will need:
Your Embrace No Code Meter
Step 1:
Press and hold the middle button
to turn on the meter.
Step 2:
Press release the middle button to
enter the set up screen.
MEM
icon should be
flashing. If the
MEM
icon is not flashing,
press and release the up or down buttons
until the
MEM
icon is flashing.
If the talking function is on the meter will say
“Memory Recall.”
Step 3:
Press and release the middle button to enter the
Memory (the 3rd picture should show “nil”). Press and
release the top button for the daily readings. When the last
reading is reached, press and release bottom button to
decline to most recent reading. When most recent reading is
reached, press and release the bottom button for the
averages (7, 14 & 30 day averages).
Press and release bottom button for the 7 Day Average, again
Viewing Your Meter's Memory
NO Code
code
code
mem
PM
code
Embrace no code En UG-511-2.qxd:2012 2012/2/4 9:34 AM Page 39