NO Code
30
Testing Your Blood Glucose
Preparing Your Lancing Device
Embrace Lancing Device included in Starter Kit only (see page 4).
Step 1:
Twist off the adjustable cap
counter clock wise and insert a clean
unused lancet as shown.
Step 2:
Twist the protective cover off the
lancet exposing the needle. Twist
clockwise adjustable cover back onto the
lancing device.
Step 3.
Adjust the puncture setting on
the adjustable cap for the puncture
depth level (1 is the lightest and 5 is
the deepest).
Step 4:
With one hand holding middle
way down the lancing device, pull and
release the opposite end of the inserted
lancet (you should hear a click sound).
The lancing device is now ready for
pricking.
IMPORTANT:
Use a new sterile lancet every
time you test to avoid cross contamination. If alcohol wipes are used
to cleanse the fingers, make sure the area is dry before the blood
sample is obtained. We recommend washing with soap & warm
water. Alcohol and Hand Sanitizer may alter the blood test.
Embrace no code En UG-511-2.qxd:2012 2012/2/4 9:34 AM Page 30
