15
(AM or PM) will be determined by setting the
hour. By pressing and releasing the top or
bottom and passing the 12 will change (AM to
PM) or (PM to AM).
Press and release the middle button to set the
hour. The minutes will begin flashing. Press and release the
top or bottom button to desired minute. Press and release
the middle button to set the minute. Repeat step 3 to Set
Alarms 2 and 3.
Step 4:
You may set 1 alarm or all 3 alarms. If you choose to
only set one alarm and have completed that desired alarm
press and release the middle button until you have exited
the alarm set up screen.
If you choose to set all 3 alarms and the desired alarm times
have been set press and release the middle button to exit the
alarm set up screen.
NOTE:
• When the alarm or alarms have been set the icons (
and
) should be displayed on the display screen of the meter.
NOTE:
• Alarm will not sound during testing.
• Alarm will follow the time format (12-hour or 24-hour) you
choose when setting the clock.
• Alarm will not be erased when changing the batteries.
Setting Up Your New System
NO Code
Embrace no code En UG-511-2.qxd:2012 2012/2/4 9:34 AM Page 15