Omnicomm LLS 20230, Installation Manual, Page: 8 / 50

2) Prepare the fuel tank for fitting works following the manufacturer's specification
and other safety regulations appropriate to this type of works.
3) Determine the fuel tank type and prepare it accordingly. Fuel tank types:
a. Plastic or metal tank with the wall thickness under 3 mm
The tanks which shape corresponds with the figure (Figure 2) should be prepared in
accordance with Appendix E. Prepare the tank for fixing the product by rivets.
Drill holes in the tank: the central hole - by a bi-metal crown ø35mm and mounting
holes - by a drill ø7mm as shown in the figure (Figure 7).
Install the rivets in the prepared holes ø7mm with the help of a riveter. A detail
description of rivets installation is given in Appendix C.
8
Abbreviations and Symbols