© 2010 Omnicell, Inc.
OmniTT/AnesthesiaTT Installation and Service Guide
/
67-2024 Rev D
Electronics Tray
1-11
Electronics Tray
PowerCom2 Tray
1. Lift the front edge of the tray over the two standoffs and pull the tray forward.
Figure 1-17.
Lift and remove the CT PC Tray from the Omni TT
2. Lift the rear of the tray and twist slightly until the front tabs clear the frame.
3. Remove the
PowerCom3 CT PC Tray
1. Place the
into the cabinet
2. Turn the two 1/4-turn fasteners securing the electronics tray clockwise to lock the tray into
place.
Figure 1-18.
Place the CT PC Tray into the Omnicell unit
