© 2010 Omnicell, Inc.
OmniTT/AnesthesiaTT Installation and Service Guide
/
67-2024 Rev D
Frames and Wireways
2-7
Manual Override Cable
6. Replace the nut that secures the cable to the frame.
7. Replace the red handle.
8. Replace the two screws that secure the manual override cable to the inside of the front of the
frame.
9. Replace the printer support bracket.
10. Replace the thermal printer paper and the spool.
11. Replace the electronics sled and reattach all cables that had been removed.
12. Close the lid to the electronics tray.
13. Feed the printer paper through the printer.
14. Power up the TT cabinet.
