Omnia 19
For installations using LCD Keypads:
For installations using LED Keypads:
How to program the remote control buttons using an LCD keypad.
In step 5 in Figure 3.3 on page 7:
1. Enter a [
SECTION NUMBER
] (401 to 416).
2. Place the cursor under the digit of the button or button combination you want
to program using the arrow buttons (see Figure 5.2 on page 20). Enter the
hexadecimal value (0 to F) of the desired option from Table 5.1 on page 21.
3. Repeat step 2 for each button or button combination of the remote control.
4. Press [
ENTER
] once the remote control is programmed. The LCD screen will
automatically switch to the next section for the next remote control.
Note: To delete the hexadecimal values (button programming) in a particular
section (401-416), press the [0] button once for every value.
How to program the remote control buttons using an LED keypad.
In step 5 in Figure 3.3 on page 7:
1. Enter a [
SECTION NUMBER
] (401 to 416).
2. Enter the hexadecimal value (0 to F) of the desired option from Table 5.1 on
page 21. After every second digit programmed, the keypad will emit a beep
tone:
First digit:
enter the choice for Button A
Second digit:
enter the choice for Button B
(
BEEP
-
BEEP
-
BEEP
)
Third digit:
enter the choice for Button C
Fourth digit:
enter the choice for Button D
(
BEEP
-
BEEP
-
BEEP
)
Fifth digit:
enter the choice for Buttons A+B
Sixth digit:
enter the choice for Buttons C+D
(
BEEP
-
BEEP
-
BEEP
)
Seventh digit:
enter the choice for Buttons A+C
Eighth digit:
enter the choice for Buttons B+D
(
BEEP
-
BEEP
-
BEEP
-
BEEP
-
BEEP
) Confirmation Beep
3. Press [
ENTER
].
Note: To delete the hexadecimal values (button programming) in a particular
section (401-416), press the [0] button once for every value.