GREETINGS!
Welcome to Omnia-3, the next generation of broadcast audio signal processing. Omnia-3
applies the same advanced design philosophy as the entire Omnia family, to yield
performance and flexibility never before available, in this class of processor. Omnia-3,
like all Omnia products, delivers crystal-clear highs, thundering bass and amazing
loudness, with none of that “digital grunge aftertaste!”
Omnia-3 is a fully digital system that is available in three versions, pre-configured to
match the processing needs of any broadcaster. For FM broadcasters there’s the Omnia-
3fm Turbo with integral stereo encoder. For AM broadcasters there’s Omnia-3am. And,
for Internet webcasters or Digital Radio, there’s Omnia-3net/drm, optimized for the
unique demands of encoded audio.
Omnia-3’s flexibility is built-into the design. Instead of keeping the processing
algorithms on a set of EPROMs or proprietary potted modules, the system’s DSP (Digital
Signal Processing) resources are entirely configured through software contained on a
plug-in PC Card (PCMCIA-type). Even fundamental rearrangements of the system
architecture can be easily accomplished in the field by plugging in a new PC card or, by
using the free downloadable Windows-based remote control application, through local
serial RS-232 connection or remotely through the optional plug-in modem card or
optional Ethernet network interface.
Omnia-3, the promise of digital. . . delivered.
Here’s to Dial Dominance,
Frank Foti
