4
DMAN-xxxx-xx (Rev x.x)
www.omnexcontrols.com
call toll free: 1-800-663-8806
Connector Pin
Assignments
Connectors as seen from under the receiver
R130 Dimensions
4.00”
5.13”
Drive Power Input
N/A
6 5 4 3 2 1
7 8 9 10 11 12
Output 4
Output 3
Output 2
Output 1
E-Stop Output
E-Stop In
N/A
Power
Ground
N/A
Use the
Wiring Diagram
and below to connect the receiver pins directly to the appropriate contacts of the machine
electronics. R130 Output Cables can be provided with every system to simplify the wiring process. The Wire # column
below only applies to the OMNEX Output Cable configuration. Tips on mounting, power connections and filtering are
also provided under
Installation Considerations
.
Wiring Diagram
The receiver is internally fused as shown using a 10A MINI® fuse. Follow the steps in transmitter / receiver replacement to
open the receiver for fuse replacement.
Receiver Relay
Outputs (Pins)
Receiver
Internal
Internally fused
E-Stop
A7
A8
A9
A10
A2
A5
A1
A12
A11
A6
A4
A3
1
2
3
4
5
5
6
6
Green/
Yellow
Output 1
Output 2
Output 3
Output 4
N/A
N/A
N/A
Drive Power Input
(May be jumpered externally)
E-Stop Out
E-Stop IN
Power
Ground
Wire #
Solid State FET 3A Max.
Solid State FET 3A Max.
Solid State FET 3A Max.
Solid State FET 3A Max.
N/A
N/A
N/A
10A
4A
4A
+9 to 30V DC
Ground
Function Notes
Attribute
Outputs—4 X Solid State, monitored, 3A max. each, total combined current 10A.
Installing the Receiver
