Omicron DANEO 400, User Manual

Page: 55 / 80

DANEO Control
55
All signals can be removed from a diagram or copied via drag and drop into a new diagram. Where
applicable, they can also be copied into another already existing diagram.
A visible analog signal can be highlighted or hidden. All diagrams can be zoomed and optimized in
their X- and Y-axis range.
5.2.3 Propagation delay analysis
You can create a propagation delay analysis from loaded recordings containing at least two PCAP
files or traffic recorded on two ports of the same device. This type of analysis enables you to create
histograms showing the propagation delay of packets between two different locations in the network.
The following figure shows an example of a propagation delay analysis displaying a propagation delay
histogram.
Figure 26: Propagation delay histogram showing the propagation delay of packets between two different
locations captured by two different DANEO 400 units
There are various filter options available. You can filter for a subset of all loaded recordings, for source
and/or destination MAC address, for GOOSE, sampled values, and generic Ethertypes found at least
in one of the PCAP files.
Applying the filter leads to the Results view where you can further specify the traffic you are
interested, for example double click or drag a particular GOOSE.