Omicron DANEO 400, User Manual

Page: 52 / 80

DANEO 400
52
10 To open the Help or the About dialog.
11 To refresh the recordings from the defined sources.
12 Sliding window to focus the diagram view to a specific time range.
5.2.1 Collecting recordings of an event
Finding events
—
navigating on the timeline
In the Event view you can search and select recordings to analyze. Online devices appear
automatically in the list of reachable devices within the Sources pane.
To see recordings from certain devices, expand the Sources pane, and clear the undesired devices.
A pin on the diagram indicates the trigger instant of a recording event. When you click the pin or
increase the zoom, each recording is displayed as a bar on a timeline.
Data sources
To add and remove folders from local or external discs containing recordings, from the Sources pane,
click Add. The list of folders remains unchanged even after restarting the application or starting a new
analysis.
Collecting the recordings
Recordings (or whole events) can be added to the Analysis recording data section, a list of all
recordings you intend to analyze.
To add a recording for analysis, select the recording from the timeline, and then click Add. The
recording appears in the Analysis recording data.
To remove a recording, click the appropriate recording from the Analysis recording data list, and
then click Remove.
To show a recording in the timeline, select the recording from the Analysis recording data list, and
then click Show.
Before the actual analysis, you have to load all recordings to your local computer. If the loading is
successful, the recording’s icon shows green. If an error occurs, the respective recording’s icon shows
red. To load recordings to your computer, click Collect. You can now export signals and recorded
traffic or start the analysis.
If you add or remove recordings while you are analyzing, the Time Signal Analysis and
Propagation Delay views will dynamically add/remove the according signals and remove deserted
diagrams.