Omicron CPC 100 Page 1 User Manual Download | Manualshive

Page: 1 / 77

background image

Preface

Introduction

Quick

Current

Transformer

Voltage

Transformer

Transformer

Resistance

Others

Common

Functions

Technical Data

CP TD1

CP CU1

CP SB1

CP CB2

Manual Information

Article Number VESD0601 - Manual Version: CPC100LITE.ENU.11

With respect to the functionality of the

CPC 100

software, this manual refers to the version

V 3.20

.

© OMICRON electronics 2014. All rights reserved.

This product includes software developed by Intrinsyc Software.

This manual is a publication of OMICRON electronics GmbH.

All rights including translation reserved. Reproduction of any kind, for example, photocopying,
microfilming, optical character recognition and/or storage in electronic data processing systems,
requires the explicit consent of OMICRON electronics. Reprinting, wholly or in part, is not
permitted.

The product information, specifications, and technical data embodied in this manual represent
the technical status at the time of writing and are subject to change without prior notice.

We have done our best to ensure that the information given in this manual is useful, accurate
and entirely reliable. However, OMICRON electronics does not assume responsibility for any
inaccuracies which may be present.

The user is responsible for every application that makes use of an OMICRON product.

OMICRON electronics translates this manual from the source language English into a number
of other languages. Any translation of this manual is done for local requirements, and in the
event of a dispute between the English and a non-English version, the English version of this
manual shall govern.

Support

When you are working with our products we want to provide you with the greatest possible
benefits. If you need any support, we are here to assist you!

24/7 Technical Support – Get Support

www.omicron.at/support
www.omicronusa.com/support

Offering our customers outstanding support is one of our top priorities. At our technical support
hotline, you can reach well-educated technicians for all of your questions. Around the clock –
competent and free of charge.

Make use of our 24/7 international technical support hotline:

+43 59495 4444

.

Additionally, you can find our Service Center or Sales Partner closest to you at

www.omicron.at

or

www.omicronusa.com

.

Customer Area – Stay Informed

www.omicron.at/customer
www.omicronusa.com/customer

The customer area on our website is an international knowledge exchange platform. Download
the latest software updates for all products and share your own experiences in our user forum.

Browse through the knowledge library and find application notes, conference papers, articles
about daily working experiences, user manuals and much more.

OMICRON Academy – Learn More

www.omicron.at/academy
www.omicronusa.com/academy

Learn more about your product in one of the training courses offered by the OMICRON
Academy.

CPC 100

User Manual

OMICRON electronics GmbH, Oberes Ried 1, 6833 Klaus, Austria, +43 59495

1
2
3
...
»

Summary of Contents for CPC 100














































































Reviews:

No comments

Related manuals for CPC 100

Brand: Raymarine Pages: 464

Brand: 3M Pages: 8

Brand: ZOLL Pages: 3

Brand: Parker Pages: 5

Brand: Bacharach Pages: 31

Brand: Backyard Play Systems Pages: 52

Brand: Backyard Play Systems Pages: 19

Brand: Backyard Play Systems Pages: 44

Brand: Bacharach Pages: 2

Brand: Federal Signal Corporation Pages: 2

Brand: Harman Kardon Pages: 7

Brand: Fellowes Pages: 20

Brand: jcb Pages: 41

Brand: Omlet Pages: 2

Brand: Omicron Pages: 382

Brand: Omicron Pages: 188

Brand: KCI Pages: 2

Brand: KCI Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands