CP CB2
CP CB2 - 1
For test applications requiring up to 2000 A.
The output current of the
CPC 100
can be increased up to 2000 A by means of an electronically
controlled current booster. The
CP CB2
can be connected close to the busbar using short high-
current cables and to the
CPC 100
with a long control cable.
Select the
CP CB2
as external booster on the
Device Setup
tab in the
Options
menu:
Note:
If you select the
CP CB2
as external booster on the
Device Setup
tab in the
Options
menu, it will be saved as default value for new test cards. However, it is also possible to select
the external booster individually on the test cards. The settings for already inserted test cards
will only be changed if no test results are available yet.
2000 A mode:
1000 A mode:
Bur
den
Bur
den
General
Operation Modes of the
CP CB2
CP CB2
