6.4 Options menu
The Options menu allows you to modify several functions of the
Bode Analyzer Suite
. You can access
the Options menu by either clicking the
icon in the top right corner of the
Bode Analyzer Suite
's
main window or by clicking
File → Options
.
Figure 6-4:
Bode 100
Options menu
In the Common section of the Options Menu you can change the following settings:
General:
Default level unit:
allows you to change the unit for
Bode 100
's
source level setting. You can choose dBm, Vpp or Vrms.
dBm defines the power dissipated into 50 Ω load.
Vpp and Vrms are the voltage output levels present when
a 50 Ω load is connected at the output. Due to the
source's output impedance the output voltage will change
depending on the impedance of the connected load. See
more in
Cursor resolution:
Defines the number of digits behind the
decimal separator for all values shown in the cursor grid.
Bode Analyzer Suite introduction
OMICRON Lab
29
Summary of Contents for Bode 100
Page 1: ...Smart Measurement Solutions Bode 100 User Manual...
Page 24: ...Figure 6 3 Collapsing the measurement and trace configuration areas 24 OMICRON Lab...
Page 45: ...Figure 7 3 Context menu of chart Measurement types and applications OMICRON Lab 45...
Page 83: ...Open B WIC Open B SMC Short B WIC Short B SMC Load B WIC Load B SMC Calibration OMICRON Lab 83...