101-050
INSTRUCTIONS
pag.30
O.M.F.B. S.p.A. Hydraulic Components
We reserve the right to make any changes without notice.
Edition 2017.09 No reproduction, however partial, is permitted.
Via Cave, 7/9 25050 Provaglio d’Iseo (Brescia) Italy Tel.: +39.030.9830611
Fax: +39.030.9839207-208 Internet:www.omfb.it e-mail:[email protected]
W
ire
L
ess
Codice fascicolo: 997-101-50380
4.
Activate the transmitter by pressing the button ON and connect the power by switching–on
the isolator switch (picture 3). The programming is done when the yellow led named LINK on the
transmitter unit is ON.
5.
Remove the electrical conductor of the terminal 1 (see details on picture 1) from the receiver
unit and from the positive pole of the motor starter switch.
6.
Fit the cover of receiver unit paying attention to the
gasket is properly fitted and tight the screws fully.
ATTENTION: The receiver stores up to two transmitters. The last code entered dele-
tes the oldest.
fig. 3
fig. 4
Codice foglio:997-101-50376 R
ev: AA
Data: V
enerdì 08 novembre 2019
