Omega WRS232-USB, User Manual

Page: 8 / 24

1.3 Statement on FCC Marking
FCC Marking
FCC ID: OUR-XBEEPRO IC #4214A-EXBEEPRO
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1.) This device may not cause harmful interference.
2.) This device must accept any interference received, including interference
that may cause undesired operation.
Marking
It is the policy of OMEGA to comply with all worldwide safety and EMI/
EMC regulations that apply. OMEGA is constantly pursuing certification of
its products to the European New Approach Directives. OMEGA will add the
mark to every appropriate device upon certification. For additional
information see Section 10 - Approvals & Regulatory Compliance.
1.4 General Description
OMEGA’s new universal wireless RS232 to USB transceiver interfaces to any
RS232 device, and makes it wireless. The wireless transmitter module connects
to an RS232 device. The wireless receiver module connects to the PC via USB
interface. The PC communicates with the RS232 device through the wireless
receiver module. The wireless transmitter/receiver modules are transparent to
the PC as if it is directly connected to the RS232 device.
Fig. 1-2 shows the wireless transmitter module & general dimensions. Fig.
1-3 shows the wireless receiver module & general dimensions. Fig. 1-4 shows
the FCC Warning label that is affixed to the wireless transmitter/receiver
modules. The transmitter/receiver module comes with two LED indicators.
The green LED indicates wireless data transmission (TX). The red LED
indicates wireless data reception (RX).
Figure 1-2 WRS232 Wireless Transmitter Module
Introduction
1
1-2
–
+
DC POWER
INPUT
9V
100 MA
WRS232
UNIVERSAL
WIRELESS
RS232
TRANSMITTER
RS232
PORT
SAVE
POWER
SAVE
POWER
20.3
(0.80)
69.9
(2.75)
50.8
(2.00)
SLIDE SWITCH
STANDARD
POWER
STANDARD
POWER
CONFIG
NORMAL
RX
TX
DC
ADAPTOR
INPUT
DIIMENSIONS: mm (in)
RS232
PORT
CONFIG
SLIDE
SWITCH
NORMAL SW2
SW1