6 |
P a g e
2
Introduction
The Layer N SP-010 Load Cell Smart Probe provides an easy way to integrate your bridge devices to the Layer N Ecosystem.
The SP-010 accepts 4-wire bridge sensors through its M12 4-pin connector and Layer N Smart Interfaces through its M12 8-
pin connector. The M12-S-M-FM accessory connector can be utilized to easily connect wire leads to your SP-010.
The Load Cell interface supports most common load cell impedances and sensitivities. The SP-010 uses a constant current
for excitation based on the bridge impedance. The bridge impedance is automatically detected when the SP-010 is first
turned on and can be re-tuned at any time using the free SYNC software package. The excitation current is only applied
during measurements to limit self-heating effects and allow for battery powered operation.
The SYNC software also allows customizing the
sensitivity
of the bridge in mV/V and the maximum
range
of the bridge in
the specific units of measure. The default unit of measure is
kg
and can also be customized. TARE and 2 Point Linearization
are also available through SYNC.
The Layer N SP-010 features 2 configurable digital I/O pins. These can be used for a myriad of applications including
initiating the TARE function, driving relays, physical alarms, or sensing dry contacts like door switches. The SP-010 can also
be utilized as an edge controller, with autonomous independent decision-making capabilities to generate local alarms or
provide control outputs based on sensor inputs.
Included with your SP-010
SP-010 Unit
Quick Start Guide
Additional Material Needed
Layer N Smart Interface
Computer with Windows OS
SYNC configuration software
Strain Bridge or Load Cell
Optional Materials
M12-S-F-FM Screw Terminal Accessory