Page 8
Step 1.
Enter the vehicle normally.
Step 2.
Using your key, turn "on" the ignition. Be prepared to perform the
following Step before 5 seconds expires.
Step 3.
Within 5 seconds, press and release the Valet Switch*. The system
will be immediately overridden.
*Important: If a coded valet has been programmed you must enter your secret code to perform this override.
Once the activated system has been overridden, if Valet Mode is desired, holding the Valet Switch
depressed for two seconds will place the system into Valet Mode.
Starter Disable
The REC-11 provides an active Starter Disable output (which engages every time the transmitter
is used to lock the doors), and may be configured, if desired, to also provide an automatic (passive)
Starter Disable. The optional passive Starter Disable may qualify you for an insurance discount, so
please check with your insurance agent.
Active Starter Disable: Whenever the doors are locked via the transmitter, the Starter Disable
will instantly engage. Unlocking the doors with the transmitter will deactivate the Starter Disable
circuit, allowing the engine to be started. Please note that the Starter Disable may be configured to
automatically reengage 90 seconds after the doors are unlocked by the transmitter; or, to engage
automatically 90 seconds after the ignition switch is turned "off". These automatic Starter Disable
options are explained in more detail in the "User Programmable Features" section of this Owner's
Manual.
Page 13
ignition is turned "off", then back "on"; the Valet Switch must be pressed once within 10 seconds of
turning the ignition back "on"*. This is the only way to cancel or turn off the Anti-Carjacking Feature
- once activated, the transmitter cannot be used to cancel or turn off the Feature.
- Custom Coded Override Mode: For a more secure starter interrupt circuit, the system can be
programmed with a custom-coded number of Valet Switch presses which are required to obtain
an Override of the system. This customizing can even be programmed to require two separate series
of Valet Switch presses. Please ask the dealer or installer for details.
Several other Programmable Features are available for the installer's convenience, allowing
flexibility in the connection of the system to the vehicle's power door locking system.
*Important: If a coded valet has been entered you must enter your secret code to cancel the Anti-
Carjacking Feature. When the ignition is turned back “on” press the valet switch equal to the first
digit in the secret code, the lights and piezo or horn will pause briefly. During this pause enter the
second digit in the secret code; the system will stop its activity. After this point turn the ignition “off”
and resume normal use of the vehicle.
