use is on the local hard drive of the computer.
Click
Browse
to locate a previously downloaded firmware file on your computer. Once the
file has been located, click
Update
to carry out the firmware upgrade process.
Important:
All current settings will be restored to their factory defaults following a firmware
upgrade.
Remote Control
This section allows you to configure your router’s remote management feature. With
remote management, you can access your router’s configuration interface remotely using
any Internet connection.
OMA-DM
Enable: Check the box to enable remote management using the Open Mobile Alliance (OMA)
Device Management (DM) protocol.
Server URL: Enter the URL of the server you will use to manage the device.
Server Port: Enter the port for the server.
Prefer Auth Type: Select your preferred authentication type from the dropdown menu.
Server Auth Type: Select the server’s authentication type from the drop-down menu.
Server ID: Enter the ID of the server.
Server Password: Enter the password for the server.
Server Nonce: Enter the number to be used by the server as the nonce for communications.
Client Auth Type: Select the client authentication type from the drop-down menu.
Client ID: Enter the client ID,
Client Password: Enter the client password
Client Nonce: Enter the number to be used by the client as the nonce for communications.
Periodical Client initiated Enable: Check to enable client initiation.
Periodical Client initiated Interval: Enter the interval period for client initiation.