to protect your network from outside intrusions and malicious attacks.
Firewall
IP Filter
Active: Check the box to active the IP filter rule.
Source IP: Enter the source IP address to be filtered.
Source From Port: Enter the starting port on the source IP.
Source To Port: Enter the ending port on the source IP.
Destination IP: Enter the destination IP address to be filtered.
Destination From Port: Enter the starting port of the destination IP.
Destination To Port: Enter the ending port of the destination IP.
Protocol: Select the protocol for the IP filter rule.
Delete: Click the icon to delete the IP filtering rule.
MAC Filter
The MAC filter allows you to allow or deny access to your wireless network based on a
client’s MAC address.
Blacklist/Whitelist: Select
Blacklist
to deny access to only the MAC addresses listed below.
Select
Whitelist
to allow access to only the MAC addresses listed below.
Active: Check the box to activate the MAC filter rule.
Source MAC: Enter the MAC address of the machine or device which you wish to filter
packets coming from.
Destination MAC: Enter the MAC address of the machine you wish to filter packets going to.
Day: Check the box for each day that you wish to activate the MAC filtering rule.
Start Time: Enter the starting time at which you wish to activate the MAC filtering rule each
day.
End Time: Enter the ending time at which you wish to deactivate the MAC filtering rule each
day.
Delete: Click the icon to delete this MAC filtering rule.
Click
Add
to add the current rule to the rules list.
DDOS