background image

1

INTRODUCTION

2

INTRODUCTION

General Description

The OMEGA

®

peristaltic pump is self-priming and can handle a wide

variety of viscosities (from air to heavy slurries) with positive
displacement.
The OMEGA

®

peristaltic pump can be used to pump fluids or gases

without contamination of the pump - the material contacts only the
tubing. The positive displacement feature makes this pump ideal for
metering applications. Each revolution of the roller assembly delivers a
precise amount of fluid.
The easy changeability of the OMEGA

®

peristaltic pump tubing makes

this the ideal pump for diverse quick change repetitive pumping jobs.
Flexible, reliable and cost efficient, the OMEGA

®

peristaltic pump can

fill most all of your fluid movement requirements.

Specifications

1. Priming Unit is self-priming and will hold vacuum when turned

off.

2. Operation: Pump can run dry without damage.
3. Weight: See model information chart.
4. Capacity: From 3mL/min to 987mL/min (see model information

chart).

5. Construction: High strength plastics and long-lasting alloy metals.
6. Maximum Head Pressure: 57 feet of water.
7. Maximum Suction Lift: 28 feet of water.
8. Maximum System Pressure: 20 psi continuous, 25 psi intermittent.
9. Certification: All motors are UL listed.
10. Rating: All gearmotors are rated for 100% continuous duty.

Summary of Contents for OMEGAFLEX FPU100 Series













Reviews: