background image

 

3

Congratulations on your purchase of an 

 

OMEGA OME412 Gas Tankless Water 

Heater. 

 

You’re about to discover that not all water 
heaters are created equal. The Omega 
Comfort has made possible the design and 
production of this efficient and incredibly 
affordable Tankless water heater that will 
provide you with many years of uninterrupted 
service. It is the mission and goal of the 
Omega Comfort to continue to combine 
innovation, quality, affordability and 
reliability in all of its Tankless water heaters. 
Once again, thank you and congratulations. 

 

Before going any further, check and make 
sure that the following items accompany 
your water heater. There are two plastic 
pouches in the Styrofoam packaging that 
contain necessary hardware. 
 
Before we go any further let’s make a 
inventory: 
 

The first pouch

 will hold the two knobs for 

the unit.    
 
 
 They are the same so no designation is 
necessary. 

* Mounting brackets and bolts available on 
request only. 

 

- four bolts for hanging the unit  
 

The second

 will hold: 

 
- The Energy consumer guide  
-The lather from the president  
-This installation and instruction manual 
-Warranty statement  
-The business opportunity proposal  
-The Discount tickets. 
-They are also 2 mounting brackets taped on 
the back of the unit.  

 

              Safety Talk  
 

1.

 

Always follow all local codes, or in 
absence of local codes, follow the 

actual edition of National Fuel Gas 
Code, ANSI Z223.1/NFPA 54 in USA or 

Installation Codes for Gas Burning 

Appliances in Canada, the CGA 
standard, CAN/CGA B149.1 or 

CAN/CGA B 149.2  

 

2.

 

Check the rating plate for the correct 

gas type, gas pressure, water 
pressure, and electrical rating. DO 

NOT INSTALL the unit if any of those 
characteristics can’t be met. 

 

3.

 

If during unpacking, you observe any 
damages on the cabinet, flue parts or 

electrical cable of the water heater,                   
STOP UNPACKING!
                                

DO NOT INSTAL until you notified 

the factory and the unit is properly 
inspected. Always follow the factory 

technician suggestions.  

 

4.

 

Properly ground the unit in accordance 

with local codes and in absence of 
those with the National Electrical 

Codes,      ANSI/ NFPA 70 in the USA 
or Canada Electrical Code Part 1 in 

Canada. 

 

5.

 

If any problem arrives turn of the gas 

first from the valve and then the cold 
water supply. Call a trained technician, 

the Gas Company or our telephone 
hotline at (888)866-2118 for 

instructions. 

 
6.

 

Use caution in planning you 

installation. For maximum efficiency it 
should be installed at equal distance 

from all consumers, easy to access, 

shortest distance from the venting 

Summary of Contents for OME 412









Reviews: