3-24
Weekday and Time Trigger Events
Using this option a time and day of the week can be configured as a start or stop
trigger.
Standalone Operation
3
Figure 3-28 Weekday and Time Trigger Event
Figure 3-29 Alarm Trigger Event
1
2
1. Trigger Time
Sets the time that the trigger event occurs.
2. Trigger Day
Sets the day of the week that the trigger even will occur on.
3. Repeat Trigger Events
If repeat trigger events are enabled the device will automatically re-arm
itself after the logging session ends. A stop trigger event must be configured
for this to occur.
Alarm Output Trigger Events
The Alarm output option allows any of the alarms currently configured and
enabled to activate an alarm output to also trigger a logging session.
2
1. Alarm Output
Selects the alarm output to be used as a trigger event. When an alarm
mapped to the corresponding output is generated, the trigger condition is
met.
2. Repeat Trigger Events
If repeat trigger events are enabled the device will automatically re-arm
itself after the logging session ends. A stop trigger event must be configured
for this to occur.
3
1
Summary of Contents for OM-DAQXL-1 Series
Page 75: ...4 1 NOTES 4...