3-17
1. Engineering Units
Allows selection of various flow measurement units.
2. K Factor
Enter the K factor provided on by the flow meter manufacturer.
3. Display Range
This is the linear mapping of the input range in terms of engineering units.
This determines what will be shown in the data display area for a given
input value.
4. Zero Adjust
This allows for a single offset value to be entered which will be applied to
all readings in terms of the selected engineering units.
5. Graph Range
This is a subset of the display range. This determines what portion of the
full display range will be displayed initially in the waveform views. This
range can also be adjusted from the waveform view.
6. Decimal Places
Select the number of decimal places for display here.
Standalone Operation
3
Totalizer inputs type must be configured in terms of volumetric flow. The Data
Ranges screen provides configuration options as shown below.
Figure 3-19 Data Ranges - Digital Totalizer
2
1
3
4
6
5
Summary of Contents for OM-DAQXL-1 Series
Page 75: ...4 1 NOTES 4...
