Installation Guide
Installing the Interface cable
- OM-CP-IFC400 or OM-CP-IFC406
Refer to the “Quick Start Guide” included in the package.
Installing the software
Insert the Omega Software Flash Drive in an open USB port. If the autorun does not appear, locate the drive
on the computer and double click on
Autorun.exe
. Follow the instructions provided in the Installation
Wizard
.
Device Operation
Connecting and Starting the data logger
1. Once the software is installed and running, plug the interface cable into the data logger.
2. Connect the USB end of the interface cable into an open USB port on the computer. Place the data logger
into the docking station.
3. The data logger will automatically appear under
Connected Devices
within the software.
4. For most applications, select “
Custom Start
” from the menu bar and choose the desired start method,
reading rate and other parameters appropriate for the data logging application and click “Start”. (
“
Quick
Start
” applies the most recent custom start options, “
Batch Start
” is used for managing multiple loggers at
once, “
Real Time Start
” stores the dataset as it records while connected to the logger.
)
5. The status of the device will change to “
Running
”, “
Waiting to Start
” or “
Waiting to Manual Start
”,
depending upon your start method.
6. Disconnect the data logger from the docking station and place it in the environment to measure.
Note: The device will stop recording data when the end of memory is reached or the device is stopped. At this
point the device cannot be restarted until it has been re-armed by the computer.
Downloading data from a data logger
1. Connect the logger to the interface cable.
2. Highlight the data logger in the
Connected Devices
list. Click “
Stop
” on the menu bar.
3. Once the data logger is stopped, with the logger highlighted, click “
Download
”. You will be prompted to
name your report.
4. Downloading will offload and save all the recorded data to the PC.
OM-CP-HITEMP140-FP
4
