06
OFOIC909B
User Manual
Installation Instructions
Prior to Beginning Installation
•
Make sure to check the condition of the appliance after
unpacking it. Do not continue with installation if it has
been damaged during transport.
•
Safe operation of this appliance can only guaranteed
if it has been professionally assembled and installed
in accordance with these instructions by a qualified
technician. The individual who assembled and installed
the appliance is liable for damages or faults resulting
from an incorrect assembly or installation.
•
Installation and maintenance must be carried out by an
authorised service agent or similarly qualified technician.
•
Ensure power to the appliance has been shut off before
carrying out any installation or maintenance.
•
It is vital that the appliance is properly earthed before
completing the installation process.
•
If a rangehood is to be fitted, follow the installation
guidelines supplied with the rangehood.
Fitting the Adjustable Feet
•
Carefully remove all parts that are not permanently fixed,
including the accessories stored within the oven cavity.
•
In a team of at least two people, gently tilt the appliance
by raising on side slightly from the floor.
•
With the plates in position, screw the adjustable feet into
the mounting holes found underneath the appliance.
Repeat this process on each side.
•
You can make the final adjustments to the feet in order
to level the appliance once the gas and electricity supply
have been connected.
•
If it is necessary to pull the appliance, the feet must be
screwed in fully beforehand. Make your final adjustments
only when the remaining steps have been completed.
Fitting the Splash Back
•
Remove the packaging and protective film from the
splash back, taking care to dispose of the material safely
and responsibly,
•
Screw the splash back onto the rear of the appliance
using the two supplies bolts, each with a washer, a
retaining washer and a nut.
