13
User Manual
Operating Your Cooktop
(Continued)
Touch the Power button to turn the cooktop on. The buzzer will sound once,
the timer will show ‘
cl
’ and the Zone Selection controls will show ‘
oo
’ indicating
that the induction cooktop has entered standby mode.
Place a suitable pan on the cooking zone you wish to use. Make sure the bottom
of the pan and the surface of the cooktop are clean and dry.
Within the Zone Selection controls, touching the desired cooking zone will cause
an indicator will flash, indicating that you are now controlling that specific zone.
Adjust the zone’s heat setting by using the sliding Temp/Time control. If you don’t choose a
heat setting within one minute, the cooktop will automatically switch off, and you will need to
start again from the beginning. You can modify the heat settings at any time during cooking.
Power Down
Power Up
If the display flashes alternately with the heat setting, this could mean that:
•
You have not placed your cookware on the correct cooking zone,
•
The cookware you are using is not suitable for induction cooking,
•
The cookware is too small or not properly centred on the zone.
Note:
No heating will take place unless there is suitable cookware on the cooking zone.
The display will automatically turn off after one minute if no suitable cookware is used.
When you have finished cooking, touch the cooking zone you had previously,
then touch the Temp/Time slider moving towards the left until the display shows ‘
o
’.
Alternatively you can turn the entire cooktop off by touching the Power button.
Power Down
‘
H
’ will show on your display to indicate that the cooking zone is hot to touch.
The cooktop will stop displaying ‘
H
’ once the surface has cooled down to a safe
temperature, cool enough to touch.
Note:
‘
H
’ can also be used an energy saving function if you want to continue
heating cookware using the zone that is still hot.
Cooking With Your Induction Cooktop
