Omega OF694IX, Instructions For Installation And Use Manual, Page: 4 / 20

4
The user must not replace the supply cable of this appliance. Always call an after-
sales servicing centre authorised by the seller in the case of cable damage or
replacement.
This appliance must be used for the purpose for which it was expressly designed.
Any other use is considered to be improper and consequently dangerous. The
manufacturer declines all responsibility for damage resulting from improper and
irresponsible use.
A number of fundamental rules must be followed when using electrical appliances
The following are of particular importance do not touch the appliance when your
hands or feet are wet do not use the appliance barefooted. Never allow the Mains
Cable to be stretched, pulled or damaged if the Cooker is moved for cleaning etc.
Do not use the cooker if the Mains Cable is damaged, consults a qualified
electrician. Do not allow the cooker to be used unsupervised by children or persons
unfamiliar with it.
Always switch off the electrical supply to the cooker and allow it to cool down before
carrying out any cleaning operations etc.
To avoid accidental spillage do not use cookware with uneven or deformed bottoms
on the burners or on the electric plate. Special care should be taken when using chip
pans etc. in order to avoid splashing or spillage of hot oil. They should not be used
unattended since overheated oil may boil over and could also ignite.
Parts of this appliance, cooking surfaces, retain heat for considerable periods after
switching off. Care should therefore be taken when touching these areas before they
have completely cooled down.
Never use flammable liquids such as alcohol or gasoline, etc. near the appliance
when it is in use.
Danger of fire: do not store items on the cooker surfaces.
Keep the supply cord away from the hot parts when using small electric appliances
near the hob,
Make sure the knobs are in its OFF position when the appliance is not in use.
If you use the power cord for single phase (220-240V), the minimum cross-sectional
area is 4mm
2
(3G4mm
2
). For three phases (380-415V), the minimum cross sectional
area is 2.5mm
2
（
5G2.5mm
2
）
When the appliance is in use the heating elements and some parts of the oven door
become extremely hot. Make sure you don’t touch them and keep children well
away.