Omega OF694IX, Instructions For Installation And Use Manual, Page: 11 / 20

11
Oven Control
The Thermostat Control knob can only be rotated clockwise from the OFF position.
Set the appliance to Manual Mode, or set a timer function. Turn oven Function
Control knob to select the cooking function required. Then turn oven temperature
control clockwise to the required oven temperature setting.
The red
Oven In Operation indicator will immediately illuminate and will automatically
go off when oven temperature reaches the temperature setting. Once the oven has
heated up, the food can be placed in the oven. Both settings can be adjusted at any
time during the cooking process.
Turn all control knobs to off once cooking has finished.
The digital timer has 5 buttons:
Setting the current time
Before operating the oven for the first time, or after a power failure, the digital display
will flash (as well as the symbol “A”), which means the current time must be set. With
all control knobs off, press the
End of Cooking button and Cooking Duration button
together, and while they are being held down, adjust the time using the Decrease
button and Increase buttons. This will adjust the current time in increments of 1
minute. Once the correct time is set, release all buttons.
Note: For timer functions, the function can be disabled by adjusting the time to zero,
or pressing the Decrease button and Increase button at the same time.
Timer
button Cooking
Duration
button End of
Cooking
button
Decrease
button
Increase
button