Electrical connection WARNING
-
THIS APPLIANCE MUST BE EARTHED.
Power supply voltage and frequency: 220-240V
a power supply cable. The cooker is designed to operate on an
electricity supply which conforms to the electrical data shown on the Rating label .
The
cooker can be
cooker itself
with a screwdriver.
The following installation procedure must be carried out by a qualified electrician.
For the installation of the feeding cable carry out the following operations:
1. Open the terminal board by inserting a screwdriver into the side tabs of the power
code cover. Use the screwdriver as a lever by pushing it down to open the cover as
below:
Note
:
Connect the electricity follows the diagram as printed in the surface of power code
cover.
Fasten the supply cable in place with the clamp and close the cover of the terminal
board.
Note:
The red electricity indicator on control panel will illuminate when the oven
/380-415 3N, 50/60Hz.
The electric
cooker without
connected to the mains only after removing the back panel of the
is working.
6
