cabinet one side or both as well as in a corner setting. It can also be used free-
standing.
The appliances can be installed next to furniture units which are no taller than the top
of the cooker hobs. If the cooker is placed touching walls or sides of neighbouring
cabinets, these must be capable of withstanding a temperature rise of 50 C above
room temperature For a correct installation of the cooker the following precautions
must be followed:
a) The cooker may be located in a kitchen.
b) Kitchen cabinets installed next to the cooker that are taller than the top of the
cooker hobs must be situated at least cm from the edge of the hobs
c) Should the cooker be installed beneath a wall cabinet, the latter should be situated
at least 70cm away from the hobs
d) The cut out for the cooker cabinet should have the dimensions indicated in the
figure
e) The wall in contact with the back of the cooker must be of flameproof material.
Important: remember to disconnect the appliance from electricity by turning off
the mains before regulating the appliance or carrying out any maintenance
work.
Important: Positioning Unpacking Installation
Min.60 cm.
Cooker Hood
Min cm
.65. (With Hood)
Min cm
.0 (Without Hood)
Levelling Your Appliance Install Anti-tilt Bracket
Take out of the 4 cooker feet from oven cavity, which be packed together with
backing rack, and then screw them into the plinth in lower part of cooker. These feet
level off the oven when necessary. The height of the cooker can be adjusted by
means of adjustable feet in the Plinths Adjust the feet by tilting the cooker from the
side. Then install the product into position. It is essential that the cooker be standing
level before installation.
In order to prevent tipping of the cooker the anti-tilt bracket must be installed with
cooker. To install Anti-tilt bracket, use screwdriver to mount the anti-tilt bracket
(1) with screws
(2) to the ground as shows in Figure
5
