background image

   

  IMPORTANT SAFETY INSTRUCTIONS 

 

 

 

 

We invite you to read this instruction booklet carefully, before installing and using the equipment.

 

It is very important that you keep this booklet together with the equipment for any future 

consultation.

 

If this equipment should be sold or transferred to another person, make sure that the new user 

receives the booklet, so that they can learn how to operate the appliance and read the 

corresponding notice.

 

This is a Class 3 appliance.

 

WARNING

 

– 

The installation must be carried out by authorised personnel, in conformity with the regulations in force.

 

– 

CAUTION: The surface temperature of underbench components exceeds 95°C. To avoid a hazard, 
underbench access must be restricted. Refer to the installation instructions.

 

– 

This appliance is not intended for use by persons (including children) with reduced physical, sensory or 
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or 
instruction concerning use of the appliance by a person responsible for their safety.

 

– 

Children should be supervised to ensure that they do not play with the appliance.

 

– 

Before powering the equipment, check that it is properly adjusted for the type of gas at disposal (see the 
“installation” paragraph).

 

– 

If the supply cord is damaged it must be replaced by a special cord or assembly available from the 
manufacturer or its service agent.

 

– 

Before carrying out the maintenance or cleaning the equipment, cut off power supply and allow it cool 
down.

 

– 

Make sure that air circulates around the gas equipment. Insufficient ventilation produces a lack of oxygen.

 

– 

In case of an intense or prolonged use of the equipment, it may be necessary to improve aeration, for 
example by opening a window or increasing rangehood venting power, if it exists.

 

– 

The products of combustion must be discharged outside through a suction hood or an electric fan (see 
the “installation” paragraph).

 

– 

For any possible operation or modification, apply to an authorized Technical Assistance Centre and 
demand original spare parts.

 

– 

Where this appliance is installed in marine craft or in caravans, it shall not be used as a space heater.

 

– 

Not for use in marine craft, caravans or mobile homes unless each burner is fitted with a flame safeguard.

 

– 

Do not spray aerosols in the vicinity of the appliance while it is in operation.

 

– 

Do not store or use flammable materials or items in the vicinity of this appliance.

 

 
DO NOT MODIFY THIS APPLIANCE.

 

 

Servicing shall be carried out only by authorised personnel.

 

The product label, with the serial number, is fixed to the underside of hob.

 

An additional label should be adhered to adjacent cabinetry for easy access: refer t o  t h e  
installation

 

instructions.

 

 

The manufacturer refuses all responsibility for possible damages to things or people, resulting

 from 

incorrect installation or from an improper, incorrect or unreasonable use of this equipment.

 

 
 
 
 
 

2

 

Summary of Contents for OCG63FXB1














Reviews: