background image

 

21 

 

Australian & New Zealand Product Warranty Statements of Standard Warranty Conditions 

Australian Customers 

Our goods come with guarantees that cannot be excluded under 
the Australian Consumer Law. You are entitled to a replacement 
or refund for a major failure and for compensation for any other 
reasonably foreseeable loss or damage. You are also entitled to 
have the goods repaired or replaced if the goods fail to be of 
acceptable quality and the failure does not amount to a major 
failure. 

New Zealand Customers 

Nothing herein contained shall be construed in any way as 
excluding or limiting your rights under the Consumer Guarantee 
Act 1993.

 

Our Warranty 

This product is also covered by the manufacturer’s warranty set 
out in this document (Our Warranty). 
Our Warranty is for a period of twenty four (24) months from the 
date of purchase and for refrigeration appliances will have an 
additional thirty six (36) months after the first twenty four (24) 
months on the Sealed System (PARTS only) Compressor & 
condenser etc. The labour cost to replace these parts is the 
responsibility of the customer. This is in addition to (and does 
not exclude, restrict or modify) any rights or remedies to which 
you may already be entitled under the Australian Consumer Law 
or the New Zealand Consumer Guarantee Act 1993 relating to 
this product. Our Warranty (which is subject to the conditions 
below) covers rectification free of charge of any fault arising from 
defective materials or components, or faulty workmanship. The 
product will be repaired or replaced at the option of Omega, and 
all costs of installation, removal, cartage, freight travelling 
expenses and insurance are to be paid by the customer. 
Our Warranty is subject to the following conditions: 
1.

 

That the purchaser contact Omega prior to any product 
repair. 

2.

 

That the purchaser carefully follows all instructions provided 
with the product and complies with all relevant electrical & 
plumbing regulations in their State when installing the 
product.  

3.

 

That the purchaser carefully follows the instructions 
provided in the owner’s handbook relating to the proper use 
and care of the product and does not use the product for 
any purpose other than the DOMESTIC use for which it has 
been designed. If the appliance is used in commercial 
applications or for rental purposes, Our Warranty is limited 
to a warranty of Twelve (12) months covering all parts with 
Three (3) months on any labour cost of service or repair.

 

Service Area 

The provision of service under Our Warranty is limited by the 
boundary / territory area of the nearest service centre. Travelling 
cost incurred for service outside this area is not covered by Our 
Warranty 

 

and service will incur commercial cost to be paid by the 
customer regulated by the number of kilometres travelled 
beyond the service area. These costs will be disclosed to you for 
acceptance by you prior to your claim being processed. 
Microwave ovens must be returned to your nearest Authorised 
Service Centre for repair as they are a carry in serviceable 
appliance.

 

What is Covered by our Warranty 

During the warranty period, Omega or its authorised Service 
Centre will, at no extra charge, if your appliance is readily 
accessible without the need of special equipment and subject to 
the terms and conditions of this warranty, repair or replace any 
parts which it considers defective.

 

What is not Covered by our Warranty 

1.

 

Products installed damaged or incomplete or not in 
compliance with the relevant electrical & plumbing 
regulations in their State. 

2.

 

Normal wear and tear e.g. cleaning, light globes, filters etc. 

3.

 

Failure resulting from power surges and electrical storms.  

4.

 

Insect or vermin infestation. 

5.

 

Unauthorised repairs or use of non-genuine Omega parts. 

6.

 

Any failure caused by the product not being used in 
accordance with the instruction and the installation manual 
provided with the product. 

7.

 

Misuse or abuse, including failure to properly maintain or 
service. 

8.

 

The clearing of blockages in pumps and hoses. 

9.

 

Damage which occurs during delivery or installation.  

10.

 

Claims to product surface coating due to liquid or solid 
spill-overs, accidental damage or damage caused from 
cleaning products not recommended by Omega.

 

How to Claim Our Warranty 

While registering your warranty is not a requirement, for peace 
of mind you can register your warranty at 
omegaappliances.com.au. 
To make a claim under Warranty you will need to contact 
Omega in Australia or New Zealand by using the contact details 
below. 
If you are contacting Omega regarding any warranty claims and 
spare parts inquiries, please make sure you have the following 
information on hand: 

1.  Product Name/Model Number 
2.  Serial Number/s 
3.  Purchase Date (as per invoice or proof of purchase) 
4.  Purchased From 
5.  Warranty Registration Number (if registered) 

Contact Us Australia 

Omega is a division of Shriro Australia Pty Ltd  
Phone: 1300 739 033 
Email: [email protected] 

Contact Us New Zealand 

Omega is a division of Monaco Corporation (member of Shriro) 
Phone: 09 415 6000 
Email: [email protected] 

Summary of Contents for OBO960X























Reviews: