background image

2

SAFeTY and GenerAL inFOrMATiOn

Save these instructions. 

For your safety, read, understand, and follow the information provided with and on this 

jack before using. The owner and/or operator of this equipment shall have an understanding of this jack and safe 

operating procedures before attempting to use. The owner and/or operator shall be aware that the use and repair of 

this product may require special skills and knowledge. Instructions and safety information shall be conveyed in the 

operator’s native language before use of this jack is authorized. If any doubt exists as to the safe and proper use of 

this jack, remove from service immediately.

inspect before each use.

 Do not use if broken, bent, cracked, or damaged parts (including labels) are noted. Any 

jack that appears damaged in any way, operates abnormally or is missing parts, shall be removed from service 

immediately and the manufacturer notified. If you suspect that the jack was subjected to a shock load (a load dropped 

suddenly, unexpectedly upon it), immediately discontinue use until jack has been checked by a factory authorized 

service center (contact distributor or manufacturer for list of Authorized Service Centers). It is recommended that an 

annual inspection be done by qualified personnel. Labels and owner’s manuals are available from manufacturer.

PrOdUCT deSCriPTiOn

Omega MagicLift™

 

Low Profile Garage Jack is designed to lift, but not

 

support, one end of a vehicle. The jack must 

be used in conjunction with a pair of appropriately rated jack stands. MagicLift™ Service Jack has a unique feature, 

which provides fast, no load lifts to the jacking point, at which time it lifts in approximately 0.75~2" increments. 

 

           NEVER

 use a hydraulic jack as a stand-alone device. After lifting, 

immediately

 support the lifted vehicle 

           with a pair of appropriately rated jack stands.

SPeCiFiCATiOnS

Model

Capacity

Jack Size (L x W x H)

Min.  

Height

Max. 

Height

Saddle 

Dia.

Volume of 

Hyd. Oil

29023

2 Ton

42 1/2" x 13 3/4" x 6 3/4"

2 1/2"

20"

4 7/8"

150 mL

 

!

Summary of Contents for magiclift 29023









Reviews: